SNMP Profile MIB Workspace Tab(3.0)

Owned by Former user (Deleted)
Last updated: Apr 20, 2023 by Jenni Wallin
2 min read

In the MIB Workspace tab, you load the MIB files to be used by SNMP collection agents in the MIB Workspace section.

You can verify that the target network element responds to SNMP requests directly from the MIB Workspace. Use the SNMP Query Results section to send out SNMP requests including SNMP GET, GET-NEXT, GET-BULK, GET-WALK, and SET.

ButtonDescription

Load MIB files

Select the MIB files you want to load and use to build the target UDR. These types of files are often defined with the extension .mib by the vendors, but there is no naming convention and it can be anything.

Unload selected MIB module

Select the MIB file you want to unload and click this button.

Unload all MIB modules

Click this button to unload all MIB modules.

Expand all tree branches

Click this button to expand all MIB tree branches.

 The SNMP Queries panel is used to determine if the remote network element responds to SNMP requests, and supports currently loaded MIB modules. Note that you must have defined the host and network settings in the Default SNMP Parameters tab for this.

Button and FieldsDescription

SNMP GET

Performs SNMP GET operations on the selected MIB object.

SNMP GET-NEXT

Performs SNMP GET-NEXT operations on the selected MIB object.

SNMP GET-BULK

Performs SNMP GET-BULK operations on the selected MIB object.

Walk MIB tree branch

Walks the selected MIB tree branch and retrieves all values.

SNMP SET

Performs SNMP SET operations on the selected MIB object. Specify the value to be set in the Value field.

Stops SNMP operation

Stops the current SNMP operation.

Clears SNMP

Clears the SNMP results area.
OIDObject Identifier of the currently selected MIB Object. This OID is used to send out SNMP requests to remote network element for testing purposes.
Value

The Value field is used to specify the value of the SNMP SET operation, which you can edit. The value must follow the syntax and semantics of the selected MIB Object. This field is also used to populate the result of the SNMP Get command, which is grayed out and cannot be edited.