Shared Table (3.0)
This section describes the Shared Table profile. This profile enables workflows to share tables for lookups.
Shared Table
Using the Table Lookup Service instead of adding tableCreate
in each workflow will increase the throughput with less duplicated tables, fewer lookups and reduced memory consumption.
The Table Lookup Service comprises a profile in which SQL queries are defined, and two APL functions; one that references the profile and creates a shared table, and one that can be used for refreshing the table data from the APL code.
The Shared Table profile is loaded when you start a workflow that depends on it. Changes to the profile become effective when you restart the workflow and each time you save the profile.
Memory Allocation
There are three different ways to allocate memory for the created tables. By default, the tables are kept as Java objects in memory. The shared tables can also be configured to keep the tables as raw data either on or off the heap. By using raw data, the overhead of java objects is removed and less memory is required.
The type of memory allocation chosen for the shared tables are configured in the Shared Table profile by selecting a Table Storage parameter. If relevant, you can select an Index Storage parameter and also Variable Width Varchar Columns. For further information about these settings, see the section below, Shared Table Profile Configuration.
Shared Table Profile Configuration
The Shared Table profile configuration is opened by clicking on the New Configuration button in Desktop and selecting the Shared Table Profile option.
The Shared Table profile dialog
The contents of the menus in the menu bar may change depending on which configuration type that has been opened.
The Shared Table profile dialog contains the following configurations:
Setting | Description |
---|---|
Database | Click the Browse... button and select the Database profile you want to use. Any type of database that has been configured in a database profile can be used. See /wiki/spaces/MD/pages/3199022 for further information. |
Release Timeout (seconds) | If this check box is selected, the table will be released when the entered number of seconds have passed since the workflows accessing the table were stopped. The entered number of seconds must be larger than 0. If this check box is not selected, the table will stay available until the execution context is restarted. |
Refresh Interval (seconds) | Select this check box in order to refresh the data in the table with the interval entered. The entered number of seconds must be larger than 0. If this check box is not selected, the table will only be refreshed if the APL function Note! The interval for checking if the table needs to be refreshed is 10 seconds, which is the minimum time before a new refresh is performed. If a refresh fails, an error is generated in system log, but the table is not cleared - the old data remains in the shared table. A new refresh is initiated every 10th second, until the refresh has finished successfully. |
Object | Select this option to set the Table Storage to Object. If you select this option, the shared tables are stored as Java objects on the JVM heap. Note! If you have selected to use a profile with the CSV database type, this is the only option available if you have not configured properties using Advanced Connection Setup. |
On Heap | Select this option to set the Table Storage to On Heap. If you select this option, the shared tables are stored in a compact format on the JVM heap. If you select On Heap, you must select an option for the Index Storage. Note! If you have selected to use a profile with the CSV database type, this option is only available if you have configured properties for this using Advanced Connection Setup. |
Off Heap | Select this option to set the Table Storage to Off Heap. If you select this option, the shared tables are stored in a compact format outside the JVM heap. Note! You are required to set the jdk parameter in the relevant Execution Context pico configuration. In case of standard EC "-XX:MaxDirectMemorySize=4096M" should be added as a jdkarg for the relevant EC in $MZ_HOME/etc/executioncontexts.xml. If using an ECD it should be specified in the Web Interface, during the creation of the ECD. Note! If you have selected to use a profile with the CSV database type, this option is only available if you have configured properties for this using Advanced Connection Setup. If you select Off Heap, you must select an option for the Index Storage. |
Unsafe | Select this option to set the Table Storage to Unsafe. If you select this option, the shared tables are stored in a compact format. If you select Unsafe, you must select an option for the Index Storage. Note! If you have selected to use a profile with the CSV database type, this option is only available if you have configured properties for this using Advanced Connection Setup. |
Primitive Lookup | Select this option to set the Table Storage to Primitive Lookup. This provides simple lookup tables with a fast lookup function but they are limited to two columns of type Note! If you use the Primitive Lookup option with a database profile that is configured for Oracle, using the Oracle column type NUMBER with a precision greater than 10 may cause errors. Note! If you have selected to use a profile with the CSV database type, this option is only available if you have configured properties for this using Advanced Connection Setup. |
Object | Select this option to set the Index Storage to Object. If you select this option, the index is stored as Java objects on the JVM heap. This option is only available if you have selected On Heap, Off Heap or Unsafe for Table Storage. |
Pointer | Select this option to set the Index Storage to Pointer. If you select this option, the index is stored as pointers to the table data. This option is only available if you have selected On Heap, Off Heap or Unsafe for Table Storage. |
Cached Long/Int Pointer | Select this option to set the Index Storage to Cached Long/Int Pointer. This option is only available if you have selected On Heap, Off Heap or Unsafe for Table Storage. For numeric index columns, the Cached Long/Int Pointer can be used for faster lookups, but at the cost of slightly higher memory consumption. |
Variable Width Varchar Columns | Select this check box to enable variable-width storage of varchar columns. This reduces memory usage for columns that are wide and of varying width. |
SQL Load Statement | In this field, an SQL SELECT statement should be entered in order to create the contents of the table returned by the The following statement will return a table named MyTable with the columns key and value when the Example - SQL SELECT statement SELECT key,value FROM MyTable If no data has been fetched from the database, SQL errors in the table lookup will cause runtime errors (workflow aborts). However, if data has already been fetched from the database then this data will be used. This will also be logged in the System Log. Whenever possible, use values of the type long instead of the types date or string. This may improve performance. Example - Using SQL SELECT statement SELECT to_number(user_id) as USER_ID, to_number(to_char(nvl(start_date,to_date( '19000101010101', 'yyyymmddhh24miss')), 'yyyymmddhh24miss')) as START_DATE, to_number(to_char(nvl(end_date, to_date( '99990101010101', 'yyyymmddhh24miss')), 'yyyymmddhh24miss')) as END_DATE FROM MyTable |
Table Indices | If you want to create an index for one or several columns of the shared table, these columns can be added in this field by clicking the Add...button and adding the columns for which you want to create an index. The index will start with 0 for the first column. Note! An index will not be created unless there are at least five rows in the table. Create indices in the Shared Table profile based on the data that is fetched from the database. Even if you look up multiple columns in APL, using one index instead of several may result in improved performance. |
Note!
Some Database Management systems provide character column types so that you are not required to specify the column width (e g TEXT
in PostgreSQL). If you use shared tables with such a column type, you cannot use the types On Heap
, Off Heap
or Unsafe
within Table Storage.
APL
The following functions are included for the Table Lookup Service:
tableCreateShared
tableRefreshShared
tableCreateShared
This function returns a shared table that holds the result of the database query entered in the Shared Table profile.
table tableCreateShared ( string profileName boolean disableCommit )
Parameters:
Returned Value | Description |
---|---|
| Name of the Shared Table profile you want to use. |
disableCommit | An optional parameter to disable the commit statement from being performed at the end of every SQL transaction for this particular function. Setting this parameter to false will result in the commit statement to be performed at the end of every SQL transaction for this particular function. By default, will have the disableCommit set to true unless otherwise changed via this parameter.It should be noted that on recent Oracle versions, the DBLink SQL transaction behavior has changed, where every single SQL statement for remote database transaction requires a commit or rollback statement in order to close a connection. |
Returns | A table containing the columns stated with the SQL query in the stated Shared Table profile, that can be shared by several workflows. |
Example - Using the function tableCreateShared
This creates a shared table called myTable with the columns returned by the SQL query in the mySharedProfile Shared Table profile.
initialize { table myTable = tableCreateShared("Folder.mySharedProfile"); }
tableRefreshShared
This function can be used for refreshing the data for a shared table configured with a Shared Table profile. The table will be updated for all workflows that are using the table and are running on the same EC.
table tableRefreshShared ( string profileName boolean disableCommit )
Parameters:
Returned Value | Description |
---|---|
| Name of the Shared Table profile you want to refresh data for. |
disableCommit | An optional parameter to disable the commit statement from being performed at the end of every SQL transaction for this particular function. Setting this parameter to false will result in the commit statement to be performed at the end of every SQL transaction for this particular function. By default, will have the disableCommit set to true unless otherwise changed via this parameter.It should be noted that on recent Oracle versions, the DBLink SQL transaction behavior has changed, where every single SQL statement for remote database transaction requires a commit or rollback statement in order to close a connection. |
Returns | A refreshed shared table. |
Example - Using the function tableRefreshShared
This returns the shared table called myTable, which uses the mySharedProfile, with refreshed data.
table myTable = tableRefreshShared("Folder.mySharedProfile");
Additional Performance Tuning
The Oracle JDBC driver includes a feature built that allows you to set the number of rows that are prefetched while the full result set is being formulated. At the time of writing, the default number of prefetched rows is 10. You can increase this value by setting the Execution Context property oracle.jdbc.defaultRowPrefetch
 in the relevant pico configuration file.