logger (4.2)

Usage

logger -pico platform           
Usage: logger -pico name

[-reset]
	 Reset logging to default. This will log to any package/class at the default level. Cannot be used in combination with other optional parameters.

[-stacktrace ON | OFF ]
	 Turn stacktrace on/off. Default is on.

[-level OFF | ERROR | WARN | INFO | CONFIG | DEBUG | TRACE | FINEST | ALL ]

[-file filename ]
	 Send logging to additional file. If used, the command applies only to the specified filename.

[-package package/class,.. ]
	 Only log specific package/class. Default is any package/class. The command applies only to the specified package.

With this command you can edit log settings for the picos and update the logging dynamically.

Options

Option	Description

Option	Description
[-reset]	Resets the logging to default settings. This option cannot be used in combination with any other option.
[-stacktrace]	Turns stacktrace on or off. The default value is on.
[-level]	Determines for which severity levels events should be logged; OFF, ERROR, WARN, INFO, CONFIG, DEBUG, TRACE, FINEST, or ALL.
[-file]	Will log to an additional file stated with filename.
[-package]	Will only log events for the stated package or class.

Return Codes

Listed below are the different return codes for the logger command:

Code	Description

Code	Description
0	Will be returned if the command was successful.
1	Will be returned if there are missing arguments: Pico not running Pico name missing Unknown failure
2	Will be returned if the level is missing or invalid.
3	Will be returned if the file is missing.
4	Will be returned if the package is missing or invalid.
7	Will be returned if the stacktrace is missing or invalid.
8	Will be returned if reset has been incorrectly used.