Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

Note!

See Bootstrapping System Certificates and Secrets before starting the installation.

Installation of  

  1. Create a namespace in which you want to install .

    $ kubectl create ns <namespace>

    Note!

    If you plan to use the same EKS cluster to host multiple namespaces of , you must enable the aws.namespace.enabled property in the values.yaml file before performing the installation. All subsequent installations of  in the same cluster must also have this property set to enable.

    When planning for multiple  installations in one EKS cluster, the following property must be set to enable for the installations to be successful. Insert the option below to the helm install command shown in step 4.

    --set aws.namespace.enabled=true

    Once enabled, the name given to your namespace will act as an identifier for the domain name and postgres.db name that will be installed.

    The domain name will have the namespace added into it, resulting in a name that looks like mzonline-namespace.mz-eks.example.com.

    The namespace will also be applied as a suffix to the postgres.db value like so <postgres.db><namespace>.

  2. Run the following commands by replacing the placeholders with the values from the terraform output

    Place HolderValue from terraform output

    <cluster_name>

    Follow as per the value configured in mz-eks.yaml

    Default is mz-eks

    <region>

    Follow as per the value configured in mz-eks.yaml

    Default is eu-west-1

    <certificate_arn>

    certificate_arn

    <db_endpoint>

    db_endpoint without the “:port” part

    <db_user>

    db_user

    <encrypted_admin_password>

    echo -n db_password | base64
    Where db_password is the value from the terraform output.

    <eks_domain_zone_name>

    eks_domain_zone_name

  3. Install Platform, use the License Key file from License Key and Helm Chart (3.2). This is an example of a minimal installation.

    If you are doing multiple Usage Engine installations on the cluster, please ensure to read through Cluster Multi Tenancy(3.2) instructions.

    -  Use a suitable unique name for <release_platform> in the command below.

    $ helm install <release_platform> ./usage-engine-private-edition --wait --timeout=5m \
--set environment=aws \
--set aws.cluster_name=<cluster_name> \
--set aws.region=<region> \
--set global.domain=<cluster_name>.<eks_domain_zone_name> \
--set aws.acm_certificate="<certificate_arn>" \
--set persistence.enabled=true \
--set platform.tls.enabled=true \
--set mzonline.ssl.enabled=false \
--set ingress-nginx-v4.enabled=true \
--set postgres.db=mz \
--set platform.db.type=postgresql \
--set postgres.adminUsername=<db_user> \
--set postgres.adminPassword="<encrypted_admin_password>" \
--set postgres.host="<db_endpoint>" \
--set-file licenseKey=<licenseKey_file> \
--set debug.script.enabled=true \
--namespace <namespace>

  4. Verify the installation.

    $ kubectl get all -n <namespace>

efs-provisioner-7bf57d6fcd-22kp7                           1/1     Running   0          17h
external-dns-86776cbff9-47pfc                              1/1     Running   0          17h
<release_platform>-ingress-nginx-v4-controller-6b8679dfc8  1/1     Running   0          17h
mz-operator-controller-manager-66648c48d9-m282f            2/2     Running   0          17h
mz-operator-controller-manager-66648c48d9-wqphx            2/2     Running   0          17h
mzonline-b56cbd899-vrp4p                                   1/1     Running   0          17h
platform-0                                                 1/1     Running   0          17h
wd-5cfcb6cbfc-lppxj                                        1/1     Running   0          17h

NAME                                                    TYPE           CLUSTER-IP       EXTERNAL-IP                                                              PORT(S)                         AGE
service/external-dns                                    ClusterIP      10.100.30.0      <none>                                                                   7979/TCP                        17h
service/<release_platform>-ingress-nginx-v4-controller  NodePort       10.100.137.133   <none>                                                                   80:30963/TCP,443:31556/TCP      17h
service/mz-operator-controller-manager-metrics-service  ClusterIP      10.100.209.39    <none>                                                                   8443/TCP                        17h
service/mz-operator-controller-manager-service          ClusterIP      10.100.141.185   <none>                                                                   443/TCP                         17h
service/mzonline                                        NodePort       10.100.173.140   <none>                                                                   80:31330/TCP,443:32378/TCP      17h
service/platform                                        LoadBalancer   10.100.61.188    a6e66e3227e4511eab69206e4c11461d-132070548.eu-west-1.elb.amazonaws.com   9000:32650/TCP,6790:30146/TCP   17h
service/wd                                              NodePort       10.100.180.176   <none>                                                                   9999:32414/TCP                  17h

NAME                                                            READY   UP-TO-DATE   AVAILABLE   AGE
deployment.apps/aws-alb-ingress-controller                      1/1     1            1           17h
deployment.apps/efs-provisioner                                 1/1     1            1           17h
deployment.apps/external-dns                                    1/1     1            1           17h
deployment.apps/<release_platform>-ingress-nginx-v4-controller  1/1     1            1           17h
deployment.apps/mzonline                                        1/1     1            1           17h
deployment.apps/wd                                              1/1     1            1           17h

NAME                                                                       DESIRED   CURRENT   READY   AGE
replicaset.apps/aws-alb-ingress-controller-7fc8f854b                       1         1         1       17h
replicaset.apps/efs-provisioner-84cc87d7f9                                 1         1         1       17h
replicaset.apps/external-dns-64f844469c                                    1         1         1       17h
replicaset.apps/<release_platform>-ingress-nginx-v4-controller-7f8cc84675  1         1         1       17h
replicaset.apps/mzonline-69b787d88                                         1         1         1       17h
replicaset.apps/wd-5b9b64c5b9                                              1         1         1       17h

NAME                                              READY   AGE
statefulset.apps/mz-operator-controller-manager   1/1     17h
statefulset.apps/platform                         1/1     17h

Accessing the Environment

Basic examples of how to define the User Interfaces below. For a more comprehensive guide, see: Starting and Managing Desktop (3.0). 

Web Desktop: https://desktop.<domain>/

Web interface: https://mzonline.<domain>/

Platform: https://platform.<domain>:<mz.webserver.port>/

Connect to Desktop

How you connect to the Desktop client depends on if you want to use Desktop in Browser or the Desktop Launcher. Refer to the relevant section below. 

Web Desktop

Example - Web Desktop URL

Example. Enter the URL in a web browser:

# Define connection type "desktop." before the <domain>, as indicated below:

https://desktop.mz-eks.tafdr.net/auth

Desktop Launcher

To deploy the Desktop Launcher, you need to do the following steps:

  1. Prerequisite: Download and install java 11 on the PC that you will use the Desktop on. Both JRE and JDK work.

  2. Download the  Desktop Launcher from https://platform.<cluster node>:<mz.webserver.port>/launch/desktop. The port is by default 9000.

    Example - Desktop Launcher URL

    Example. Enter the URL in a web browser:

# Define connection type "platform." before the <domain>, as indicated below:

https://platform.mz-eks.tafdr.net:9000/launch/desktop/

  3. To install the Desktop Launcher, for Windows, download the exe file and double-click to install it. Alternatively download the OS independent  jar file and use java -jar to install it.

    Example - Desktop Launcher via java -jar

    $ java -jar standard standard-mzx-launcher-1.1.4.jar
  4. When you add an instance in the Desktop Launcher, set the Port to 9000. Host should begin with "platform." before the <domain>.



Connect to the Web Interface

Example - Webb Interface URL

Example. Enter the URL in a web browser:

# Define connection type "mzonline." before the <domain>, as indicated below:

https://mzonline.mz-eks.tafdr.net/

Define Configurations on the Installation

The Installation guide is now complete. To get a system ready for production or testing purposes, you will need to define Configurations and ECs, there are three different types as described below:


  • No labels