The interface is a stand-alone program for Linux that communicates with MediationZone through the specified TCP port.
The interface consists of the following binaries:
start_ftaminterface- Starts the interface.status_ftaminterface- Reports status of the interface.stop_ftaminterface- Terminates the interface.ftamagent- Internal communication agent.
It is important to start the interface by using a full path name. If the binaries are placed in /opt/mz/ftam/bin the same path must be used when the interface is started. The following command can be used to start the interface:
$ /opt/mz/ftam/bin/start_ftaminterface ROOT_DIR=/var/ftamroot PORT=16702 The port name mzftam not found in /etc/services, the default value 16702 will be used. Binary directory: /opt/ftam_isode_if FTAM root directory: /var/ftam_root FTAM interface port: 16702 INFO: The interface has been started. $
Info!
The binaries can be found in the installation package that you used to install MediationZone. They are located in: <release content directory>/release/complete/other/FTAM_LINUX_ISODE.tar. The release content directory will be where you have extracted your installation files from the tgz.
Note!
If you are using a 64-bit OS, you will be required to install the 32-bit versions of the OS system libraries. This is because the ftam binaries requires the 32-bit versions of the OS system libraries to be present.
The root directory contains internal state information for recovery and log files.
This page originally had excerpt from /wiki/spaces/MD91/pages/23152738 but that agent is not yet part of 9.2 so added this as a new Excerpt for MZ9