The following values:

ID=11
Priority=2
Arguments=['Product 1']
Targets=[1,2]

ID=12
Priority=1
Arguments=['Product 2-4']
Targets=[3]
StopFallthrough=yes

will give the following setup:

• The second mapping table, with priority 1, will have higher priority than the first one, with priority 2.

• The first mapping table use the product Product 1, while the second mapping table use the products Product 2, Product 3, or Product 4.

• The first mapping table uses PCC Rules with IDs 1 and 2, while the second mapping object uses the rule with ID 3.

• If the second mapping table is active, only the rules for this table will be returned even if other rules apply.

The following values:

ID=1
Period='WEEKDAYS'
Charging_Rules=[1]
Rule_Name='PRIMARY'
QoS=[20]

ID=2
Period='NIGHTS'
Charging_Rules=[3]
Rule_Name='SECONDARY'
QoS=[10]

ID=3
Period="WEEKENDS'
Charging_Rules=[5]
Rule_Name='THIRD'
QoS=[30]

will give the following setup:

• The IDs used for the three rules; 1,2 3, are the IDs stated as Targets in the mapping tables, see the section above, RulesMapping UDR.

• The three rules are active during three different periods; WEEKDAYS, NIGHTS and WEEKENDS, see Periods Data Model Rules.

• Rule number 1 uses the charging rule with ID 1, rule number 2 uses charging rule with ID 3 and rule number 3 uses charging rule with ID 5, see the section below, Charging_Rule UDR.

• The names of the rules are PRIMARY, SECONDARY and THIRD.

• The first rule uses QoS ID 20, the second rule uses QoS ID 10 and the third rule uses QoS ID 30, see the section below, QoS_Information UDR.

The following values:

ID=1
Name='PRIMARY'
Static_Rule=111
Dynamic_Rule=
Final_Indication_Rule=

ID=3
Name='SECONDARY'
Static_Rule=112
Dynamic_Rule=
Final_Indication_Rule=

ID=5
Name='REST'
Static_Rule=
Dynamic_Rule=
Final_Indication_Rule=200

will give the following setup:

• The first charging rule, with ID 1 and name Primary, uses the static rule with ID 111.

• The second charging rule, with ID 3 and name Secondary, uses the static rule with ID 112.

• The third charging rule, with ID 5 and name Rest, uses the final indication rule with ID 200.

The following values:

ID=10 
Name='Quality A' 
APN_AGG_MBR_DL=32 
APN_AGG_MBR_UL=32 
GBR_DL=64 
GBR_UL=64 
MBR_DL=128 
MBR_UL=64 
QCI=7 
 
ID=20 
Name='Quality B' 
APN_AGG_MBR_DL=32 
APN_AGG_MBR_UL=32 
GBR_DL=64 
GBR_UL=64 
MBR_DL=128 
MBR_UL=128 
QCI=4

will give the following setup:

• The maximum aggregated bit rate for both uploading and downloading data is 32 kbit/s for both QoS settings, Quality A and Quality B.

• The guaranteed bit rate for both uploading and downloading data is 64 kbit/s for both QoS settings.

• The maximum bit rate for uploading data is 64 kbit/s for Quality A and 128 kbit/s for Quality B.

• The maximum bit rate for downloading data is 128 kbit/s for both QoS settings.

• The first QoS setting uses Quality of Service Indicator 7, while the second uses Quality of Service Indicator 4.

The following values:

ID=111
Rule_Name='STATIC 1'

ID=112
Rule_Name='STATIC 2'

ID=113
Rule_Name='STATIC 3'

will give the following setup:

• The three static rules; 111, 112 and 113, have the names STATIC 1, STATIC 2 and STATIC 3.

The following values:

ID=100 
Name='FIRST REDIRECT' 
Rating_Group=1 
Final_Unit_Action=1 
Redirect_Address_Type=2 
Redirect_Server_Address='http://example1.com' 
 
ID=200 
Name"'SECOND REDIRECT' 
Rating_Group=2 
Final_Unit_Action=1 
Redirect_Address_Type=2 
Redirect_Server_Address='http://example2.com'

will give the following setup:

• The first rule, with ID 100 and name First Redirect, will use rating group 1 while the second rule, with ID 200 and name Second Redirect will use rating group 2.

• Both rules will use redirect messages (indicated by setting Final_Unit_Action to 1).

• The type of address used for the redirect messages is URL (indicated by setting Redirect_Address_Type to 2).

• The subscribers adhering to the rule with ID 100 will be redirected to http://example1.com, while the subscribers adhering to the rule with ID 200 will be redirected to http://example2.com/.