Diameter Server and Client Inside Same Kubernetes Cluster(4.3)

This section describe how to setup Diameter Server and Diameter Client hosted in the same Kubernetes Cluster. For example, the Diameter Server and Diameter Client hosted in GCP Kubernetes Cluster.

Assumed that the Diameter Server and Diameter Client workflows have been created with the following configurations.

To run these Diameter Server and Diameter Client workflows, deploy an ECD pod for each workflow respectively. Therefore, login to desktop-online Web UI, go to Manage menu, select EC Deployment > New EC Deployment.

To deploy an ECD Pod for Diameter Server workflow on the cluster, follow these steps:

1. On the Configure EC Tab, fill in the EC Deployment Name and the rest of the fields if needed. Click Next to continue.

2. On the Configure Auto Scale Tab, do not enable Auto Scaling. Click Next to continue.

3. On the Configure Workflow Tab, create a new real time workflow from the selected workflow template i.e., Diameter Server or Diameter Client (either one). Click Next to continue.

4. On the Configure Network Tab, create a Network Service type ClusterIP with appropriate port. The Service Name must set to the Diameter Server or Diameter Client hostname.

Before finalise the EC deployment, check and verify EC Deployment by pressing “View YAML“.

For instance, the Diameter Server YAML content looks like this:

apiVersion: "mz.digitalroute.com/v1alpha1"
kind: "ECDeployment"
metadata:
  creationTimestamp: "2024-09-09T03:41:05.000000Z"
  name: "ecd-server-digitalroute-com"
  namespace: "uepe"
  resourceVersion: "6342188"
  uid: "260e7271-14b7-43e7-8fb5-4535bb630f1d"
spec:
  jvmArgs:
  - "Xmx512M"
  - "Xms512M"
  manualUpgrade: false
  persistence:
    pvcName: "ec1-filestore-pvc"
  ports:
  - containerPort: 3868
    protocol: "TCP"
  resources:
    limits:
      memory: "640Mi"
    requests:
      memory: "640Mi"
  services:
  - name: "server-digitalroute-com"
    spec:
      ports:
      - name: "port-1"
        port: 3868
        protocol: "TCP"
        targetPort: 3868
      type: "ClusterIP"
  workflows:
  - instances:
    - name: "Diameter_Server"
      parameters: "{}"
      useExtRef: "{}"
    template: "Diameter.DiameterDCCAServerSimulator"

For instance, the Diameter Client YAML content looks like this:

apiVersion: "mz.digitalroute.com/v1alpha1"
kind: "ECDeployment"
metadata:
  creationTimestamp: "2024-09-09T03:42:56.000000Z"
  name: "ecd-client-digitalroute-com"
  namespace: "uepe"
  resourceVersion: "6343337"
  uid: "b4e223b7-75ff-453f-bdea-c8f73b5e0342"
spec:
  jvmArgs:
  - "Xmx512M"
  - "Xms512M"
  manualUpgrade: false
  persistence:
    pvcName: "ec1-filestore-pvc"
  ports:
  - containerPort: 3869
    protocol: "TCP"
  resources:
    limits:
      memory: "640Mi"
    requests:
      memory: "640Mi"
  services:
  - name: "client-digitalroute-com"
    spec:
      ports:
      - name: "port-1"
        port: 3869
        protocol: "TCP"
        targetPort: 3869
      type: "ClusterIP"
  workflows:
  - instances:
    - name: "Diameter_Client"
      parameters: "{}"
      useExtRef: "{}"
    template: "Diameter.DiameterClientSimulator"

Now, finalise EC Deployment by clicking Finish. Choose not to enable the ECD for now.

Repeat step 1 till step 4 to deploy another ECD Pod for Diameter Client workflow on the same cluster.

Following the creation of both ECD, let’s monitor the Kubernetes Services type ClusterIP that is being created.

Execute this command:

kubectl get svc -n uepe

On the cluster, the is the output.

NAME                                               TYPE           CLUSTER-IP    EXTERNAL-IP     PORT(S)                                       AGE
client-digitalroute-com                            ClusterIP      10.12.6.12    <none>          3869/TCP                                      35m
desktop-online                                     NodePort       10.12.5.41    <none>          9001:31441/TCP                                5d23h
external-dns                                       ClusterIP      10.12.2.229   <none>          7979/TCP                                      6d
ingress-nginx-controller                           NodePort       10.12.1.201   <none>          80:31079/TCP,443:31170/TCP                    6d
platform                                           LoadBalancer   10.12.2.222   34.142.171.15   9000:30870/TCP,6790:31985/TCP,443:31140/TCP   5d23h
server-digitalroute-com                            ClusterIP      10.12.5.153   <none>          3868/TCP                                      36m
uepe-operator-controller-manager-metrics-service   ClusterIP      10.12.7.111   <none>          8443/TCP                                      5d23h

(Old)

The following examples shows how to setup both Diameter server and client inside the same cluster.

1. First setup the Server and Client clusterIPs in their respective yaml files as shown in the following examples. The selector part binds the IP address to the correct ECD. The ECD should only contain one pod. The port is cluster-global, which means that two ECDs can’t use the same port (as listening port).
   
   The listening port for the two server workflows are 3868 (server), 3870 (backupserver), and 3869 (client).

   Example - Server ClusterIP yaml

   apiVersion: v1
   kind: Service
   metadata:
     name: serverip
   spec:
     type: ClusterIP
     ports:
       - targetPort: 3868
         port: 3868
         name: server
       - targetPort: 3870
         port: 3870
         name: backupserver
     selector:
       ecd: server

   Example - Client ClusterIP yaml

   apiVersion: v1
   kind: Service
   metadata:
     name: clientip
   spec:
     type: ClusterIP
     ports:
       - targetPort: 3869
         port: 3869
         name: client
     selector:
       ecd: client
   
   

   The string ecd: client matches the same string under labels in the ECD yaml shown further below. See example.

   IP addresses

   For both peers inside the cluster it should be the IP of the clusterip that's connected to the ECD in question. So first create the clusterip for both client and server and then get the IP address using kubectl command as shown below and put that in the hostAliases section of the ECD yaml.

   For one peer inside the cluster and one outside, the IP address of the node should be used for the peer that is inside the cluster, and the IP address of the peer outside the cluster must be reachable from the cluster.

   1. Run the following command to get the IP address for the ECD:

      kubectl get svc

      For example:

      NAME                                             TYPE        CLUSTER-IP       EXTERNAL-IP   PORT(S)                         AGE
      clientip                                         ClusterIP   10.98.186.113    <none>        3869/TCP                        41d
      uepe-operator-controller-manager-metrics-service ClusterIP   10.102.28.47     <none>        8443/TCP                        43d
      desktop-online                                   NodePort    10.106.161.255   <none>        80:32008/TCP                    43d
      platform                                         NodePort    10.109.197.192   <none>        9000:30022/TCP,6790:32193/TCP   43d
      serverip                                         ClusterIP   10.110.121.222   <none>        3868/TCP                        38d

      Note!

      The IP addresses retrieved from this command are then used for the respective hostAliases. 

   2. Run the following command:

      kubectl apply -f path/to/file.yaml

2. Since the server needs to have information about both the client and server hostnames, so both the hostnames need to be configured for both ECDs.
   The following examples (for the client and server) is just an excerpt of the full ECD to show how to use hostnames:

   Example - hostAliases for Client

   - ip: "10.110.121.222"
     hostnames:
       - "server.digitalroute.com"
       - "server"
       - "backupserver.digitalroute.com"
       - "backupserver"
   - ip: "10.98.186.113"
     hostnames:
       - "client.digitalroute.com"
       - "client"
    

   Example - hostAliases for Server

   - ip: "10.110.121.222"
     hostnames:
        - "server.digitalroute.com"
        - "server"
        - "backupserver.digitalroute.com"
        - "backupserver"
   - ip: "10.98.186.113"
     hostnames:
        - "client.digitalroute.com"
        - "client"
     

   
   The following is an example of a full ECD - one Diameter client and two Diameter servers (three peers). The hostnames must be included in the yaml file irrespective of the fact if it is for client or server.
   
   Example - Full server-ecd

   metadata:
     name: "diameter-server"
     annotations:
       meta.helm.sh/release-name: "mediationzone-ecd"
       meta.helm.sh/release-namespace: "davids"
     labels:
       app.kubernetes.io/managed-by: "Helm"
       app.kubernetes.io/component: "ecd"
       ecd: "server"
   apiVersion: "mz.digitalroute.com/v1alpha1"
   kind: "ECDeployment"
   spec:
     jvmArgs:
     - "Xms256m"
     - "Xmx512m"
     nodeHost: "dig-srv-test03.dev.drint.net"
     resources:
       requests:
         memory: "320Mi"
       limits:
         memory: "640Mi"
     hostAliases:
       - ip: "10.110.121.222"
         hostnames:
         - "server.digitalroute.com"
         - "server"
         - "backupserver.digitalroute.com"
         - "backupserver"
       - ip: "10.98.186.113"
         hostnames:
         - "client.digitalroute.com"
         - "client"
     manualUpgrade: false
     

   1. Run the following command:

      kubectl apply -f /path/to/file/serverecd.yaml

Example - Full client ecd

metadata:
  name: "diameter-client"
  annotations:
    meta.helm.sh/release-name: "mediationzone-ecd"
    meta.helm.sh/release-namespace: "davids"
  labels:
    app.kubernetes.io/managed-by: "Helm"
    app.kubernetes.io/component: "ecd"
    ecd: "client"
apiVersion: "mz.digitalroute.com/v1alpha1"
kind: "ECDeployment"
spec:
  jvmArgs:
  - "Xms256m"
  - "Xmx512m"
  nodeHost: "dig-srv-test02.dev.drint.net"
  resources:
    requests:
      memory: "320Mi"
    limits:
      memory: "640Mi"
  hostAliases:
    - ip: "10.110.121.222"
      hostnames:
      - "server.digitalroute.com"
      - "server"
      - "backupserver.digitalroute.com"
      - "backupserver"
    - ip: "10.109.59.222"
      hostnames:
      - "client.digitalroute.com"
      - "client"
  manualUpgrade: false