Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Current »

Upgrade Usage Engine

  1. Validate the Helm Chart Contents

    To ensure there are no errors in the Helm chart content, you can run the following:

    $ helm lint usage-engine-private-editionYou can also run the helm template chart to see the yaml file with modified values:
    $ helm template usage-engine-private-edition

  2. Upgrade all pods.

    - Use the new License Key for the upgrade. In case you have not received a new License Key, see the Release Note for the alternative method.

    - In the case the upgrade fails, it will rollback automatically. The new resources from the upgrade will be removed automatically.

    Before you upgrade, validate the helm chart with a dry-run:

$ helm upgrade <release_name_platform>  usage-engine-private-edition --set-file licenseKey=<licensekey_file> --dry-run --debug  --namespace <namespace>


If the validation is ok, continue with the upgrade:

$ helm upgrade <release_name_platform> usage-engine-private-edition --set-file licenseKey=<licensekey_file> --atomic --cleanup-on-fail --debug --namespace <namespace>

  3. Verify the installation. STATUS Running. The READY state (ready/desired) should be 1/1, 2/2 and so on.  It can can take a few minutes before everything is in up and running.

    # Verify pods

$ kubectl get pods --namespace <namespace>

#Example
NAME                                          READY   STATUS    RESTARTS   AGE
aws-alb-ingress-controller-5fbf5b59d9-wsgzt       1/1     Running   0          24h
efs-provisioner-69854b5db8-2bhds                  1/1     Running   0          24h
external-dns-7b79999d56-tq6pl                     1/1     Running   0          24h
uepe-ingress-nginx-5767cbbcf8-d6crt               1/1     Running   0          24h
uepe-operator-controller-manager-646b766d44-2s9sl 2/2     Running   0          24h
uepe-operator-controller-manager-646b766d44-mmzhs 2/2     Running   0          24h
desktop-online-574cb89f54-7vkrg                   1/1     Running   0          24h
platform-0                                        1/1     Running   0          24h

# Verify service contexts to connect

$ kubectl get services --namespace <namespace>

#Example
NAME                                             TYPE           CLUSTER-IP       EXTERNAL-IP                                                              PORT(S)                                        AGE
external-dns                                     ClusterIP      10.100.125.15    <none>                                                                   7979/TCP                                       24h
ingress-nginx                                    NodePort       10.100.31.226    <none>                                                                   80:32266/TCP,443:30403/TCP                     24h
kubernetes                                       ClusterIP      10.100.0.1       <none>                                                                   443/TCP                                        46h
uepe-operator-controller-manager-metrics-service ClusterIP      10.100.152.116   <none>                                                                   8443/TCP                                       24h
uepe-operator-controller-manager-service         ClusterIP      10.100.207.9     <none>                                                                   443/TCP                                        24h
desktop-online                                   NodePort       10.100.8.213     <none>                                                                   80:31250/TCP,443:30738/TCP                     24h
platform                                         LoadBalancer   10.100.30.233    a21e6b94b01a0f02fe62803350-284407273.eu-west-1.elb.amazonaws.com         9000:31561/TCP,6790:31654/TCP,443:31216/TCP    24h

    Note!

    The output will show the exposed ports when you run kubectl get services. We have used a default namespace and helm chart for efs-provisioner,  external-dns and aws-alb-ingress-controller from 3PP → "Readme" instruction from zip file in /wiki/spaces/DRXXE/pages/6194875


Manual Downgrade

If you need to do a manual downgrade of the system, see Downgrade(4.0) for more information.

Manual ECD rolling update

  • In case Automatic Rolling Update was never defined for the ECDs, you need to enter the Web interface and manually upgrade the ECDs to the new image by clicking Upgrade in the EC deployment interface.

  1. Connect to the Web Interface:

    Web-Interface

    Web interface: https://mzonline.<domain>/

Example:
https://mzonline.mz-eks.tafdr.net/

  2. Login to the Web Interface and click on Upgrade for the ECDs with a warning sign, to apply the upgrades.


    Example of the ECD ecd01, with a warning sign ready for the image upgrade.

  • No labels