Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

The instructions for a Diameter server inside Kubernetes cluster (also referred as cluster here) and Diameter client outside of Kubernetes cluster also applies to the Diameter client inside Kubernetes cluster and Diameter server outside Kubernetes cluster.

If the Diameter server (assuming  is the server) is inside the cluster and the Diameter client is outside the cluster, some things need to be done to enable proper Diameter communication.

  1. The pod running the Diameter Server workflow should be connected to a specific host, instead of being able to run on any host. This is because the hostname used (Diameter Identity/Host) should be connected to the external IP of that node. This is done by adding the parameter nodeHost: nodename to the parameter spec: in the ECD yaml (a full example appears further down).

  2. In addition, the hostname used for the server must be added to the /etc/hosts file on the client and accordingly the hostname of the client needs to be added to the /etc/hosts file of the server. The latter is done through another addition to the ECD yaml, namely hostAliases. The hostname must be mapped to the external IP of the cluster node. In addition, the port that the server listens to must be mapped to an externally available port (nodePort in the example below).

    Since the default hostname of the pod will change on each restart, the server hostname also needs to be entered as a hostAlias so that the Diameter stack agent can bind to that hostname, this is the reason that the server is also part of the example below.

    Example

    services:
      - name: "diameter-server-nodeport-1"
        spec:
          externalTrafficPolicy: "Local"
          type: "NodePort"
          ports:
          - protocol: "TCP"
            port: 3868
            targetPort: 3868
            nodePort: 31868
      hostAliases:
        - ip: "10.46.124.143"
          hostnames:
          - "server.digitalroute.com"
          - "server"
          - "backupserver.digitalroute.com"
          - "backupserver"
        - ip: "10.46.240.33"
          hostnames:
          - "client.digitalroute.com"
          - "client"

    In the following example, the server Diameter Stack agent needs to listen to (in this case) the port 3868, whereas the client connects to port 31868. Since the client is outside the cluster, the same IP that is used in the client (as listening port) can be used in the server as remote port (the nodePort is not needed for outgoing requests, for example, Capabilities-Exchange-Requests).

    This is the full ECD yaml for server inside cluster and client outside cluster. For client inside cluster and server outside, just reverse it.

    Example - ECD yaml for server inside cluster and client outside cluster

    metadata:
      name: "diameter-server"
      annotations:
        meta.helm.sh/release-name: "usage-engine-private-edition-ecd"
        meta.helm.sh/release-namespace: "davids"
      labels:
        app.kubernetes.io/managed-by: "Helm"
        app.kubernetes.io/component: "ecd"
    apiVersion: "mz.digitalroute.com/v1alpha1"
    kind: "ECDeployment"
    spec:
      jvmArgs:
      - "Xms256m"
      - "Xmx512m"
      nodeHost: "dig-srv-test03.dev.drint.net"
      resources:
        requests:
          memory: "320Mi"
        limits:
          memory: "640Mi"
      services:
      - name: "diameter-server-nodeport-1"
        spec:
          externalTrafficPolicy: "Local"
          type: "NodePort"
          ports:
          - protocol: "TCP"
            port: 3868
            targetPort: 3868
            nodePort: 31868
      hostAliases:
        - ip: "10.46.124.143"
          hostnames:
          - "server.digitalroute.com"
          - "server"
          - "backupserver.digitalroute.com"
          - "backupserver"
        - ip: "10.46.240.33"
          hostnames:
          - "client.digitalroute.com"
          - "client"
      manualUpgrade: false





  • No labels