ChargedItemFieldTypeUDR

This is a constant UDR, where value returns either "String", "Date", "Number" or "Boolean", depending on if the field type is STRING, DATE, NUMBER, or BOOLEAN.

For an example that describes how to get the value, see the section below, OperationTypeUDR.

Field	Description
`NUMBER`	Constant value "Number"
`STRING`	Constant value "String"
`BOOLEAN`	Constant value "Boolean"
`DATE`	Constant value "Date"
`value (string)`	The property type value, can be "String", "Date", "Number", or "Boolean". This is a read-only field.

ChargedItemFieldUDR

Field	Description
`name (name)`	The name of the field
`type (ChargedItemFieldTypeUDR)`	The type of the field
`value (any)`	The value of the field which must be cast to the right type, based on the type field. Note that numbers are represented as strings.

ChargedItemUDR

Field	Description
`key (int)`	The numeric key of the charged item
`chargedItemClassId (string)`	The class identifier corresponding to the charged item
`fields (list<ChargedItemFieldUDR>)`	A list of all the fields in the corresponding charged item

ChargeExecutionContextUDR

This UDR is used to limit what is included in the response of a charge or blank charge operation.

Info!

The Execution Context in the UDR name is not related to the MediationZone Execution Context.

Note!

The SAP CC APIs that the SAP CC agents depend on does not support setting the itemImmediatelyLoaded flag for ChargingOutputContext. As a result, the SAP CC agents are unable to support scenarios such as CIT creation via charging requests.

Field	Description
`outputChargeableItemExported`	This boolean field determines whether chargeable items must be exported in the output of the charging operation.
`resultAccountInfoReturned`	This boolean field determines if the account information is returned in the result of the charging operation.
`resultAccountOperationReturned`	This boolean field determines if the account operations is returned in the result of the charging operation.
`resultAllReturned`	This boolean field determines if all available information is returned in the result of the charging operation.
`resultChargeableItemInfoReturned`	This boolean field determines if the chargeable item information is returned in the result of the charging operation.
`resultChargedItemReturned`	This boolean field determines if the charged item is returned in the result of the charging operation.
`resultChargingContractInfoReturned`	This boolean field determines if the charging contract information is returned in the result of the charging operation.
`resultChargingProcessInfoReturned`	This boolean field determines if the charging process information is returned in the result of the charging operation.
`resultNotificationReturned`	This boolean field determines if the notifications is returned in the result of the charging operation.
`resultResponseItemReturned`	This boolean field determines if the response items is returned in the result of the charging operation.

TransactionSetUDR

This UDR represents the TransactionSet associated with a charging request result. The transaction set may be empty.

Field	Description
`allNotifications (list<NotificationUDR>)`	This list offers a shortcut to the generated Notification contained in all generated transactions (master and dependents). For further information, see 9.69.4.3 Notification UDRs.
`dependentTransactionList (list<TransactionUDR>)`	This list contains the transactions generated by the associated dependent charges (if they exist). For further information, see the section below, TransactionUDR.
`masterTransaction (list<TransactionUDR>)`	This field contains the transaction generated by the master charge. For further information, see the section below, TransactionUDR.
`name (string)`	The name
`origin (string)`	The origin of the transaction set. It corresponds to the origin of the master transaction which can be: `usage` `recurring` `oneshot`
`snapshotId (int)`	The snapshot identifier used to rate event
`transactionSetId (long)`	The transaction set owner id

ServiceSessionUDR

This UDR represents the services associated with a Charging Request.

Field	Description
`cancellation (boolean)`	`TRUE`: Cancel session `FALSE`: Do not cancel session – this is the default value.
`confirmationItem (ChargeableItemUDR – optional)`	A ChargeableItem represents the information that the client needs to send to perform the charge process. It consists of a name and a list of properties.
`propertyToInverse (string)`	The name of the property used by the inverse rating process. This property must be contained in the `chargeableItem` definition on the SAP Convergent Charging Core server.
`reservationId (string)`	This field contains a unique identifier for the service.
`reservationItem (ChargeableItemUDR – optional)`	A ChargeableItem represents the information that the client needs to send to perform the charge process. It consist of a name and a list of properties.
`sessionResolutionMode (ResolutionModeUDR – optional)`	This optional field can be used to pass over the default agent configuration. If set, it defines the session termination to apply if this particular session has reached its 'time to live'. The session can be either cancelled (cancel) or confirmed (confirm).
`sessionTTL (long – optional)`	This optional field can be used to pass over the default agent configuration. If set, it defines the 'time to live' for this particular charging session. Note! This field will only work on SAP CC 5.0 SP1 and later. For older versions, this field will be present but it will not have any effect on the TTL.

TransactionUDR

This UDR represents the Transaction associated with a Charging Request Result. A transaction corresponds to the details of the price computation by the rating engine. It may be empty.

Field	Description
`currency (string)`	A string representation of the currency. The currency value respects the SAP Convergent Charging `Currency.getAlphaCode()` format. For example `EUR`, or `USD`
`detailList (list<TransactionDetailUDR>)`	This field contains the list of the transaction details produced during the price plan execution. It may be empty. For further information, see the section below, TransactionDetailUDR.
`dispatchCode1 (string)`	This field contains the value of the “dispatch code”.
`dispatchCode2 (string)`	This field contains the value of the “dispatch code2”.
`dispatchCode3 (string)`	This field contains the value of the “dispatch code3”.
`label (string)`	This field contains the label of the transaction.
`MoneyAmount (string)`	A string representation of the charged amount. The toConfirmMoneyAmount value respects the SAP Convergent Charging `Money.toString()` format. For example: `EUR 12.15`, or `USD 0.123456`
`notifList (list<NotificationUDR>)`	This list contains the notification produced during the price plan execution. For further information, see 9.69.4.3 Notification UDRs.
`offerCode (string)`	This field contains the offer code of the subscription.
`chargeCode (string)`	This field contains the charge code of the subscription which leads to this transaction.
`operationType (OperationTypeUDR)`	This field contains the operation type of the transaction. It can be: `CREDIT` `DEBIT`
`origin (OriginUDR)`	This field contains the origin of the transaction. It can be: `ONE_SHOT` `RECURRING` `USAGE`
`relationshipType (RelationshipTypeUDR)`	This field contains the relationship type of the transaction. It can be: `CLIENT` `PARTNER`
`sessionId (string)`	When the transaction is produced during a session based rating, this field contains the corresponding session id.
`subscriptionCode (string)`	This field contains the subscription code against which the transaction was produced.
`transDate (date)`	The date of the transaction

TransactionDetailUDR

This UDR represents a transaction detail. It corresponds to a property produced during the price plan computation.

TransactionDetailUDR is an instance of a PropertyUDR.

For more details, refer to the section below, PropertyUDR.

PropertyUDR

This UDR is the base representation of a name-value property. In addition, a type can be added to specify how to cast the value.

Field Description

ccType (PropertyTypeUDR)

The type of property. This field is read only. The ccType will be populated when the properties are returned while retrieving charged items. When it comes to submitting chargeable items, it can be left empty.

The property types can be:

STRING - Used for String, Boolean, or DRIpAddress Object types
NUMBER - Used for Byte, Character, Short, Integer, Float, Double, Long and BigInteger object types
DATE - Used for Date or DRDate Object types
BIG_DECIMAL - Used for BigDecimal Object type. In this case the value will be a string representation of this bigDecimal (BigDecimal.toPlainString()).

name (string) The name of the property

value (any) The value of the property

OperationTypeUDR

This is a constant UDR, where value returns either "1" or "0", depending on if the operation type is CREDIT or DEBIT.

This is an APL code example for how to get the operation type value:

OperationTypeUDR rt = (OperationTypeUDR) input; 
if( rt.value == rt.DEBIT.value ) {
	...
	...
} else if ( rt.value == rt.CREDIT.value ) {
	...
	...
}

Field	Description
`CREDIT (OperationTypeUDR)`	Constant value 1
`DEBIT (OperationTypeUDR)`	Constant value 0
`value (string)`	The operation type value, which can be "1" or "0". This is a read-only field.

OrderStateUDR

This is a constant UDR, where value returns either "2" or "1", depending on if the order state is FREE or PAID.

For an APL code example describing how to get the value, see the section above, OperationTypeUDR.

Field	Description
`FREE (OrderStateUDR)`	Constant value 2
`PAID (OrderStateUDR)`	Constant value 1
`value (string)`	The order state value, which can be "2" or "1". This is a read-only field.

OriginUDR

This is a constant UDR, where value returns either "2", "1" or "0", depending on if the origin is ONE_SHOT, RECURRING or USAGE.

For an APL code example describing how to get the value, see the section above, OperationTypeUDR.

Field	Description
`ONE_SHOT (OriginUDR)`	Constant value 2
`RECURRING (OriginUDR)`	Constant value 1
`USAGE (OriginUDR)`	Constant value 0
`value (string)`	The origin value, which can be "2", "1" or "0". This is a read-only field.

PropertyTypeUDR

This is a constant UDR, where value returns either "String", "Date", "Number" or "BigDecimal", depending on if the property type is BIG_DECIMAL, DATE, NUMBER or STRING.

For an APL code example describing how to get the value, see the section above, OperationTypeUDR.

Field	Description
`BIG_DECIMAL (String)`	Constant value x
`DATE (Date)`	Constant value x
`NUMBER (Number)`	Constant value x
`STRING (BigDecimal)`	Constant value x
`value (string)`	The property type value, which can be "String", "Date", "Number" or "BigDecimal". This is a read-only field.

RelationshipTypeUDR

This is a constant UDR, where value returns either "1" or "0", depending on if the relationship type is PARTNER or CLIENT.

For an APL code example describing how to get the value, see the section above, OperationTypeUDR.

Field	Description
`CLIENT (RelationshipTypeUDR)`	Constant value 0
`PARTNER (RelationshipTypeUDR)`	Constant value 1
`value (string)`	The relationship type value, which can be "1" or "0". This is a read-only field.

ResolutionModeUDR

This is a constant UDR, where value returns either "-1", "1" or "0", depending on if the resolution mode is USE_DEFAULT, CANCEL, or CONFIRM.

For an APL code example describing how to get the value, see the section above, OperationTypeUDR.

Field	Description
`USE_DEFAULT (ResolutionModeUDR)`	Constant value -1
`CANCEL (ResolutionModeUDR)`	Constant value 1
`CONFIRM (ResolutionModeUDR)`	Constant value 0
`value (string)`	The resolution mode value, which can be "-1", "1" or "0". This is a read-only field.

ResponseItemUDR

Field	Description
`key (int)`	The numeric key of the response item
`chargedItemClassId (string)`	The class identifier corresponding to the response item
`fields (list<ChargedItemFieldUDR>)`	A list of all the fields in the corresponding response item

ResultTypeUDR

This is a constant UDR, where value returns either "-1", "0" or "1", "2" or "3" depending on if the result type is USE_DEFAULT, NO_TRANSACTIONS, MASTER_TRANSACTION, ALL_TRANSACTIONS, or ALL_TRANSACTIONS_AND_RECURRING.

For an APL code example describing how to get the value, see the section above, OperationTypeUDR.

Field	Description
`USE_DEFAULT (ResultTypeUDR)`	Constant value -1
`NO_TRANSACTIONS (ResultTypeUDR)`	Constant value 0
`MASTER_TRANSACTION (ResultTypeUDR)`	Constant value 1
`ALL_TRANSACTIONS (ResultTypeUDR)`	Constant value 2
`ALL_TRANSACTIONS_AND_RECURRING (ResultTypeUDR)`	Constant value 3
`value (string)`	The result type value, which can be "-1", "0" or "1", "2" or "3". This is a read-only field.

Next:

9.70 SAP JCo Uploader Agent

Browser not supported