This section describes the different properties that you can use in the STR to configure the Platform.

Property	Description
mail.smtp.ssl.protocols	Default value: "TLSv1.2" Specifies the SSL protocols that will be enabled for SSL connections. The property value is a whitespace separated list of tokens, with possible values "TLSv1, TLSv1.1, TLSv1.2". TLSv1 is not recommended.
mz.codeserver.saveStateInterval	Default value: `10` Whenever an update to the Codeserver state is made, such as when saving a workflow with a change in its APL code, the Codeserver state will have to be saved. Using this property allows you to set the minimum interval (in seconds)for how often the Codeserver saves its state to the disk.
mz.config.persistance.obfuscation	Default value: `none` Use this property to enable or disable obfuscation of configuration data stored in the `MZ_HOME/data` folder: `none` - Data is not obfuscated when saved. The system cannot read obfuscated data. `readwrite` - Data is obfuscated when saved. The system can read both obfuscated and plain text data. `read` - Data is not obfuscated when saved. The system can read obfuscated data. Use this value when you want to convert obfuscated to plain text. When you set this property, existing data is not automatically updated. The data for each individual configuration is stored obfuscated or in plain text when you save it. See also `mz.user.persistance.obfuscation`.
mz.crypto.hash.algorithm	Default value: SHA-256 This property is to use the crypto algorithm for hashing data, for example, files.
mz.crypto.key.crypt	Default value: AES This property is to use the crypto algorithm to encrypt and decrypt sensitive data within communications, for example, passwords. The value can be set to AES/GCM/NoPadding for a higher level of security. Note! If you have set the value to AES/GCM/NoPadding, and you try to decrypt data, and it does not succeed on the first attempt, the property value reverts to AES.
mz.crypto.key.stream	Default value: PBKDF2WithHmacSHA256 This property is to encrypt configurations when you have a user password for the encryption. The value can be set to PBEWithMD5AndDES. Note! If the decryption fails when using the selected algorithm, it will try to use the other algorithm.
mz.cryptoservice.keystore.path	Default value: `""` This property specifies the full path to the crypto service keystore file. This keystore file is used for encrypting/decrypting passwords with specific keys stored in the keystore and needs to be of JCEKS type. See the JDK product documentation for further information about using keytool in different scenarios. See also the sections describing the `mzsh encryptpassword` and `mzsh reloadkeystore` in the Command Line Tool User's Guide for further information.
mz.cryptoservice.keystore.password	Default value: `""` This property specifies the password for the crypto service keystore file specified by the mz.cryptoservice.keystore.path property. This keystore is used for encrypting/decrypting passwords with specific keys stored in the keystore. See the sections describing the mzsh encryptpassword and mzsh reloadkeystore in the Command Line Tool User's Guide for further information.
mz.database.profile.validation.skip	Default value: `false` Set this property to `true` if you want to bypass the remote database validation in the Database profile. Validation requires that the configured database, tables and columns are available, and if they are unavailable when the validation is performed, the configuration and all its dependents can be marked as invalid. You can set this property if you require to validate your configuration when, or in an environment where, the database or its tables are unavailable.
mz.desktop.accelerators	Default value: `"/path/to/accelerators.properties"` Set this property with the default value to set your own key bindings. You require to unpack a properties file from `devkit.jar`, and go to `com/digitalroute/devkit/ui/accelerators/accelerators.properties`. Save the `accelerators.properties` file to disk, and set this property to enable the `accelerators.properties` file.
mz.dynamicconnections	Default value: `true` This property specifies if the pico instances for Desktop, mzsh, and Service Contexts must be registered on pico hosts for access: `true` - Instances always have access. `false` - Instances must be registered on Pico hosts for access.
mz.httpd.security.disabled.cipher	Default value: "`^._anon_.$, ^SSL_.$, ^(.(3DES)).$, ^._DHE_.*$`" This property allows you to use regex to manually disable the Java security cipher suite when using any Picos to connect to the Platform with SSL enabled. This property is used when the Platform uses a different Java version than the rest of the Picos. As there may be differences in the security ciphers between versions, the property aims to disable these ciphers to allow the Picos to communicate with the Platform.
mz.javac.source	Default value: `"default"` If the compilation of the system is slow after you import a new configuration, set this property to determine the Javac version to be used. The possible values are 7, 8 or default. Setting this value to "7" may improve the compilation time.
mz.license.file	Default value: `$MZ_HOME/etc` This property specifies the directory that contains the installation license file i.e. `mz.license`.
mz.mailserver	Default value: `""` This property specifies the name or IP address of the mail server to be used for event-generated e-mails. The use of this property has been deprecated and will removed in future releases. Use the property `mz.mailserver.host` instead.
mz.mailserver.auth	Default value: `false` Enables SMTP authentication. The use of this property has been deprecated and will removed in future releases. Use the property `mz.mailserver.auth.enabled` instead.
mz.mailserver.auth.user	Default value: `""` Set the SMTP user to be used for login when having enabled SMTP authentication with the `mz.mailserver.auth` property.
mz.mailserver.auth.enabled	Default value: `false` Set this property to true if you want to enable SMTP authentication. If set to `true`, you also need to add the properties `mz.mailserver.auth.user` and`mz.mailserver.auth.password`.
mz.mailserver.host	Default value: `""` This property specifies the name or IP address of the mail server to be used for event-generated e-mails.
mz.mailserver.auth.password	Default value: `""` Set the encrypted password to be used for the SMTP user stated in the `mz.mailserver.auth.user` property when having enabled SMTP authentication with the`mz.mailserver.auth` property. To encrypt the password, use the `mzsh encryptpassword` command, and enter the result in this field. See the Command Line user documentation for further information on how to use this command.
mz.mailserver.port	Default value: `25/587` Use this property to configure which port you want to used for sending event-generated e-mails. When the `mz.mailserver.auth` property is not used, i e set to `false`, the default value is `25`. When the `mz.mailserver.auth` is set to `true`, the default value is `587`.
mz.notifier.mailfrom	Default value: `""` This property specifies the sending e-mail address to be used for event-generated e-mails. You must enter an e-mail address for an event notification to be sent by e-mail.
mz.picostorage.usecache	Default value: `true` This property enables the cache during a system import.
mz.platform.extref.ttl	Default value: 5 Use this property to configure a cache for the external references by entering the number of seconds you want the cache to live. If you require to disable the cache, for example in a development environment, set the value to 0.
mz.platform.s3.extref.ttl	Default value: 5 Use this property to configure a cache for the external references stored on an S3 Container by entering the number of seconds you want the cache to live. This will only work when you have the S3 Properties File selected in your external reference profile. If you require to disable the cache, for example in a development environment, set the value to 0.
mz.platform.wf.max.concurrent.starts	This property decides how many workflows that can start loading at the same time. No limit is set for actual running workflows. Only change the property if support has expressly recommended it. It is normally not recommended to change this property since it can introduce some instability.
mz.platform.wf.threadpool	Default value: 10 This is a platform property that controls the number of threads used for the thread pool used by the workflow and group servers. If you have a very large batch system with a lot of scheduling and workflows that are starting and stopping frequently, this property might need to be increased to get more threads.
mz.security.max.password.age.enabled	Default value: `false` Enables or disables the password expiration check. If both properties above are set to true, the user is required to change the password every N days set in `mz.security.max.password.age.admin` and `mz.security.max.password.age.user`. Note! This property is only applicable when `mz.security.user.control.enabled` is set to true.
mz.security.max.password.age.admin	Default value: `30` This property specifies the maximum password age for administrator users in days. Please refer `mz.security.max.password.age.enabled` column. Note! This property is only applicable when `mz.security.user.control.enabled` is set to true.
mz.security.max.password.age.user	Default value: `90` This property specifies the maximum password age for users in days. Please refer `mz.security.max.password.age.enabled` column. Note! This property is only applicable when `mz.security.user.control.enabled` is set to true.
mz.security.max.password.history	Default value: `12` This property specifies how many passwords back that are required to be unique before reusing an old password. Note! This property is only applicable when `mz.security.user.control.enabled` is set to true.
mz.security.user.control.enabled	Default value: `false` This property enables or disables enhanced user security. If set to `true`, a number of rules regarding passwords apply as soon as the platform is restarted. For information about enhanced user security, see 6.1 Access Controller in the Desktop User's Guide. Note! At installation of , this property will be set to the same value as the installation property `install.security`.
mz.security.user.control.password.length.count	Default value: `8` This property specifies the minimum total number of characters in a password. Note! This is only applicable when the value of `mz.security.user.control.enabled` is `true`.
mz.security.user.control.password.length.message	Default value: `The password needs to be at least 8 characters.` The message to be displayed for the user when they have not met the condition for the minimum length of the password. Note! This is only applicable when the value of `mz.security.user.control.enabled` is `true`.
mz.security.user.control.password.numcaps.count	Default value: `1` This property specifies the minimum number of uppercase characters and numeric characters in a password. Note! This is only applicable when the value of `mz.security.user.control.enabled` is `true`.
mz.security.user.control.password.numcaps.message	Default value: `The password needs at least one capital letter or a number in it.` The message to be displayed for the user when they have not met the condition for the minimum number of upper case or numerical characters in the password. Note! This is only applicable when the value of `mz.security.user.control.enabled` is `true`.
mz.security.user.control.password.numcaps.pattern	Default value: `[A-Z0-9]` The pattern of the permitted values in the regular expression. The password will be matched to the pattern to determine if the condition is met. Note! This is only applicable when the value of `mz.security.user.control.enabled` is `true`.
mz.security.user.control.password.special.count	Default value: `1` This property specifies the minimum number of special characters, e g number or capital letter, in a password. Note! This is only applicable when the value of `mz.security.user.control.enabled` is `true`.
mz.security.user.password.reset.enabled	Default value: `false` This property enables or disables the password reset feature. If both properties above are set to `true`, new user is required to change password during their first login. If admin reset password for a user, the user is also required to change password when they re-login. Note! This is only applicable when the value of `mz.security.user.control.enabled` is `true`.
mz.security.user.restricted.login	Default value: false Use this property to restrict user login to one instance for each interface type, i e Desktop, Web Interface, and Command Line Tool mzsh.
mz.servicehost.port.range	This property determines the port range used by services. The system will bind to ports in the provided ranges. The values must not overlap with the ports used by SCs that are running on the same host.
mz.servicehost.natures	This property contains one or more service-specific identifiers that set behaviors, that are required by services that run on the Platform.
mz.statistics.collect.all	Default value: `true` This property enables or disables the collection of all statistics on the Platform. When you set this property to `false`, it overrides `mz.statistics.collect.pico` and `mz.statistics.collect.workflow`.
mz.statistics.collect.pico	Default value: `true` This property enables or disables the collection of pico statistics on the Platform.
mz.statistics.collect.workflow	Default value: `true` This property enables or disables the collection of workflow statistics on the Platform.
mz.subfolder.enabled	Default value: false This property determines if the subfolders feature in Desktop is enabled or disabled. If you want to enable the subfolders feature in Desktop, set the value to true.
mz.subfolder.separator	Default value: `"_"` This property determines the separator you can use when naming folders on the Desktop so that the subfolders feature is enabled. The valid values are `"-"` or `"_"`.
mz.systemlog.maxresults	Default value: `500000` This property determines the maximum number of search results when you run a search in the System Log.
mz.ultra.bitfield.codec	Default value: "false" This property selects the implementation that is to be used for ultra bit_block. If set to “true”, the newly selected implementation will be used. Values that are not set using this property will use the old implementation.
mz.ultra.xml.handle_as_string	Default value: "" If you want to set any XML data type to be converted into a string, you must set the value of this property to the data type you intend to convert. For example, if you wish to have all decimal data types be handled as strings, set the value of this property to `decimal`. For further information on XML schema support, see 18. XML Schema Support.
mz.ultra.xml.restrictions	Default value: off If you want to use XML union element type, you must enable this property `.` If you want to use unions and restrictions inside unions, set this property to `union` . If you want to use restrictions everywhere, including inside union type, set this property to `on` . For further information on XML schema support, see 18. XML Schema Support.
mz.use.date.timezone	Default value: `false` Setting this property to `true` will instruct the system to use the attached time zone when SQL input originates from a date object. In most cases, the property should be set in the pico configuration of EC/ECSAs. However, in case of audit processing, the property should also be set in the pico configuration of the Platform. Note that if the `mz.use.date.timezone` property is used for setting dates with another time zone, there will be no way of keeping track of the actual time zone in the database, and you may have to manually convert the date during selection. To keep track of the time zone in an Oracle database, use the data type TIMESTAMP WITH TIME ZONE.
mz.user.account.change.password.limit	Default value: `false` Setting this property to `true` will limit the password change to only once per day. User from the Administrator Group is not restricted by this property. Note! This is only applicable when values of both `mz.security.user.control.enabled` and `mz.security.user.password.reset.enabled` are `true`.
mz.user.account.inactivity	Default value: `false` Setting this property to `true` will disable user accounts with inactivity exceeding 90 days. However, system accounts (admin accounts) are not affected by this. Note! This is only applicable when the value of `mz.security.user.control.enabled` is `true`.
mz.user.emergency.unlock	Default value: `""` Setting this property with an encrypted password will change the mzadmin password at platform startup. For information about how to reset the mzadmin password, see 2.9 Resetting the mzadmin Password. Note! This property should always be removed when not being used. Otherwise, the mzadmin password will be reset at every platform startup.
mz.use.prefixfilter	Default value: `false` If you add this property with the value `true`, files or configurations with more than one underscore at the beginning of the name are not visible from the Desktop after you restart the Platform.
mz.user.persistance.obfuscation	Default value: `none` Use this property to enable or disable obfuscation of user data stored in the `MZ_HOME/data` folder: `none` - Data is not obfuscated when saved. The system cannot read obfuscated data. `readwrite` - Data is obfuscated when saved. The system can read both obfuscated and plain text data. `read` - Data is not obfuscated when saved. The system can read obfuscated data. Use this value when you want to convert obfuscated to plain text. When you set this property, existing data is not automatically updated. The data for each individual configuration is stored obfuscated or in plain text when you save it. See also `mz.config.persistance.obfuscation`.
mz.userserver.filebased	Default value: `true` This property specifies if user and access group data should be stored on disk instead of the database. Note! The possibility to store user and access group data in the database will be removed in future releases and it is therefore highly recommended to set the value of this property to `true`.
mz.wi.host	Default value: Taken from the common property `pico.rcp.server.host`. This is the host IP address or hostname used to communicate with the Platform Web Interface.
mz.wi.port	Default value: `9000` This is the port used to communicate with the Platform Web Interface. Note! This is the port that you use to launch the Desktop.
mz.osgi.bootdelegation.ext	Default value:`""` This property adds extra value to Felix Osgi's boot delegation. Note! The value of this parameter should be a string with an extra boot delegation for Felix Osgi. The value should not include space and should not start or end with a comma. For `AppDynamic` monitoring tool the value should always be `com.singularity.*`.
pico.rcp.codeserver.deregister.timeout	Default value: `2700` This property specifies the time (in seconds) to wait before de-registering an unreachable EC from the Platform. Once de-registered, another EC can be brought up to replace it. An EC is considered to be unreachable when the last known state was that it was running but has since lost contact with the Platform.
pico.rcp.tls.keystore	Default value: `""` Set this property to enable the system to use TLS for all RCP connections that are not from the local host. If this property is not set, TLS will not be used at all.
pico.tmpdir	Default value: `MZ_HOME/tmp` This property specifies the Pico temp directory you want the Platform to use.
snmp.trap.format.b	Default value: `""` Add this property and set it to true if you want to activate the new format for SNMP events corresponding to the latest MIB definitions. If this property is not included, or if it is set to false, the previous invalid format will apply, which may be useful for backward compatibility reasons.

Next:

2.6.5 Service Context Properties

Browser not supported