You open the Radius Server agent configuration dialog from a workflow configuration. To open the Radius Server agent configuration, click Build → New Configuration. Select Workflow from the Configurations dialog. When prompted to Select workflow type, select Realtime. Click Add agent and select Radius Server from the Collection tab of the Agent Selection dialog.
...
The list on the NAS tab can be dynamically updated.
...
The Radius Server agent configuration dialog - NAS tab
...
In the NAS tab, all NASes that the agent collects information from, are specified.
Setting | Description |
|---|---|
Host Address | The IP address or hostname that the NAS, sending packets, is located on. |
Secret Key | Key used for authentication of a received packet. This key must be identical to the one defined in the NAS. |
If you are defining the NAS you can define them per workflow instances using the Workflow Table tab in Workflow Properties. By using the Workflow Table tab to set the property Additional Hosts to Default or Per Workflow.
...
| Code Block |
|---|
[{"host":"<host>", "secret":"<password><encrypted password>"}] |
...
The Radius Server Additional Hosts property with value - Workflow Instances
...
Miscellaneous Tab
...
Setting | Description | ||
|---|---|---|---|
Port | The port number where the Radius Server agent will listen for packets from the NAS(es).
| ||
PDU Lifetime (millisec) | If set to a value larger than 0 (zero), duplicate check is activated. The buffer saved for comparison is the packets collected during the set time frame. | ||
Skip MD5 Calculation | If enabled, the check for MD5 signatures is excluded. This is necessary if the Radius client does not send MD5 signatures along with the packets, in which case they would be discarded by the Radius Server agent.
| ||
Duplicate Check | Checking for duplicate packets can be made based on:
When a duplicate is detected, it is silently thrown away (no message is logged) and the Radius agent responds as if a normal packet was received. | ||
Error Handling | Select an Error Route to ensure that all rejected packets are routed into the workflow using this route. This is optional. |