This section describes the different properties that you can use in the STR to configure EC/ECSAs.
...
| Property | Description | |||||
|---|---|---|---|---|---|---|
ec.httpd.enabled | Default value: This property specifies if the Web Interface for ECs should be active. | |||||
ec.httpd.host | Default value: Taken from the value of the common property This property specifies the host used to communicate with an EC Web Interface. Set it to 0.0.0.0 to bind all addresses on the currently used host. This is done to access the Web Interface by both virtual and logical IP addresses or hostnames. | |||||
ec.httpd.password | Default value: This property specifies the password to be used for the EC Web Interface. | |||||
| ec.httpd.port | Default value: This property specifies the TCP port of the EC Web Interface.
| |||||
ec.httpd.refreshrate | Default value: This property specifies how often (in seconds) a Web Interface page shall be refreshed. The refresh can also be done manually, as described in the Web Interface user's guide. | |||||
mz.wi.cross-origin.allowedOrigins | Default value: This property allows you to use RESTful Web Services across different origins. The possible value is a comma-separated list of the hosts:ports that are permitted to use the RESTful Web Services, e g: |
...
| Property | Description |
|---|---|
| mz.cb.statistics.flush.period.in.seconds | Default value: If you have enabled the log-to-file functionality in the Advanced tab of the Couchbase profile, you can determine how often in seconds you want to flush this file by modifying the value. |
...
Default value: 5000This property is used to configure the amount of time a thread should remain in the the blocked queue until it tries for a new connection. If a connection is made available before this time, the thread's waiting time is interrupted.
| Property | Description | |||||
|---|---|---|---|---|---|---|
| max.cached.prepared.statements | Default value: If you have want to change the number of preparedStatements that are cached between connections, you can use this property to specify a different number than default.
| |||||
connectionpool.strict.pool.size | Default value: If you enable this property, the database pool enables the Blocking Queue implementation where there is a strict restriction to the maximum number of connections. When the property is set to false, then the database connection pool will create additional temporary connections. When the pool is full, these connections are closed as soon as the workflow thread returns the connection to the pool. | |||||
connectionpool.wait.timeout.milliseconds |
Default value: This property is used to configure the amount of time a thread should remain in the the blocked queue until it tries for a new connection. If a connection is made available before this time, the thread's waiting time is interrupted. |
...
| Property | Description |
|---|---|
mz.diameter.tls.accept_all | Default value: If the property is set to false (default), the Diameter Stack agent does not accept any non-trusted certificates. If it is set to true, the Diameter Stack agent accepts any certificate. In either case, any unrecognized certificate will be logged in an entry in the System Log (in PEM format). |
| mz.workflow.decoderqueue.max_threads | Default value: This property specifies the maximum number of threads used by the Diameter Stack agent for decoding messages. Setting a lower value than the default may enhance performance if the host machine has a low number of CPU cores and the active workflows are complex. On the other hand, the decoding may constitute a bottleneck when performing simple processing on a host machine with a high number of CPU cores. In this case, setting a higher value may provide better performance. |
...
| Property | Description |
|---|---|
mz.dx200.acceptsequentiallost | Default value: The default behavior for the FTP/DX200 collection agent is to skip files if the sequential order of the files has been lost. Add this property and set it to true if you want to continue collecting files even if the sequential order has been lost. |
mz.dx200.acceptoverwritten | Default value: The default behavior for the FTP/DX200 collection agent is to not collect files that have been in FULL state before being set to OPEN, and untransferred data has been overwritten. Add this property and set it to true if you want to collect files that have been overwritten. |
...
| rest.client.idleTimeout | Default value: "200s" This property specifies the time a connection stays idle before it is eligible to be disconnected. If there is no traffic during the specified time, the REST Client agent will remove the session once the timeout is reached. You can also set this property on the container level, where the value is only applied to all EC's ECs under a particular container. You can refer to 2.6.2 Container Properties for more information. |
rest.client.max.chunk.size | Default value: "8m" This property specifies the maximum chunk size of the HTTP response that the REST Client agent should receive from the server. The agent will reject data with sizes that are larger than the value defined by this property. You can also set this property on the container level, where the value is only applied to all EC's ECs under a particular container. You can refer to 2.6.2 Container Properties for more information. |
rest.client.max.content.length | Default value: "64m" This property specifies the maximum length of the HTTP content received by the REST Client agent. The agent will reject content that is longer than the specified value defined by this property. Although it is also possible to set the value of this property to infinite, there will be a possibility where that the EC will crash from an out-of-memory error. So do consider setting the memory size of the EC to be higher than the expected size of the HTTP content that the agent will be receiving. You can also set this property on the container level, where the value is only applied to all EC's ECs under a particular container. You can refer to 2.6.2 Container Properties for more information. |
...
| Property | Description |
|---|---|
mz.inmemory_table.table_strategy | Default value: This property defines how shared tables are kept in memory. The possible values are:
|
mz.inmemory_table.index_strategy | Default value: This property defines how the index for shared tables are is kept in memory. The possible values are:
|
mz.inmemory_table.fixed_width | Default value: This property defines if the varchar data fields are stored with a fixed or variable width. The possible values are:
|
...
| Property | Description |
|---|---|
ec.backlog.dir | Default value: This property is applicable for ECs and determines whether you want events and error messages occurring when the contact is lost to be logged in a backlog or not. If the property is not present, events and messages will not be logged. The value of this property specifies where the backlog resides. |
ecsa.backlog.dir | Default value: This property is applicable for to ECSAs. All events and error messages occurring when the contact is lost will be logged in a backlog. The value of this property specifies where the backlog resides. |
| ec.excel.dateformat | Default value: "dd/MM/yyyy" This property will define the format of the date to be decoded for the ExcelCellUDR. For the date to be parsed successfully, you will have to provide the format of the date received by the ExcelCellUDR. The values in this property conforms conform to the standards of the SimpleDateFormat java class. If the date is not parsed successfully, the data type of the date field will be treated as a string. |
ec.shutdown.time | Default value: This property specifies the maximum time (in milliseconds) the EC will wait before a real-time workflow stops after a shutdown has been initiated. This is to enable the workflow to stop all input and drain all UDRs in the workflow before shutting down. The wait time is initially set to 60 seconds. If this value is set to 0 all draining is ignored and the workflow will stop immediately. |
pico.bootstrapclass | Default value: This property specifies the bootstrap classes that are required by some components. |
| pico.ec.do_graceful_shutdown | Default value: true This property determines the behavior of the mzsh command shutdown. When you have set the value of this property to |
pico.rcp.server.port | Default value: This property specifies the port that is used for EC-to-EC communication. If no port is set, a dynamic port will be used and the port number will change each time an EC is restarted. |
| mz.use.drdateformat | Default value: The date syntax used in the APL functions Even though the syntax conforms to You can enable date format handling based on the |
mz.use.date.timezone | Default value: Setting this property to In most cases, the property should be set in the pico configuration of EC/ECSAs. However, in case of audit processing, the property should also be set in the pico configuration of the Platform. Note that if the mz.use.date.timezone property is used for setting dates with another time zone, there will be no way of keeping track of the actual time zone in the database, and you may have to manually convert the date during selection. To keep track of the time zone in an Oracle database, use the data type TIMESTAMP WITH TIME ZONE. |
pico.type | Default value: "" This property specifies the type of pico instance used for the EC. The possible values are EC and ECSA. |
| Scroll ignore | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||||||